DOTH-300
APPLICATION
MANUAL
▪ Write Data box; Data to write to EEPROM of tag
▪ READ; Reads selected EEPROM Block of tag
▪ WRITE; Writes Write Data to selected EEPROM Block of tag
▪ STATUS; Gets Lock status of selected EEPROM Block of ISO-15693 tag
▪ LOCK; Locks selected EEPROM Block of ISO-15693 tag
▪ EAS; Sets EAS information to ICODE tag
▪ Type; Sets tag type to access (ISO-14443A, ISO-14443B, ISO-15693, TagSys, All Type)
▪ Block; Assigns EEPROM Block to access
▪ Key Type; Selects Secret Key Type of MIFARE CLASSIC tag (A or B)
▪ NUM; Sets the number of blocks to read at Multi-read of ISO-15693 tag
▪ Key Data; Assigns Secret Key value of MIFARE CLASSIC tag (HEX, Default to
0xFFFFFFFFFFFF)
▪ Value; Sets value to make EEPROM Block of MIFARE CLASSIC tag as value block (DEC)
▪ +/-; Sets value to increase or decrease Value Block of MIFARE CLASSIC tag
▪ EAS; Sets EAS on ISO-15693 tag (Alarm, Lock, Reset, Set)
▪ LoadKey; Authenticates secret key(Key Type, Key Data) of MIFARE CLASSIC tag
▪ SET; Sets EEPROM Block of MIFARE CLASSIC tag to Value Block as defined in Value.
▪ GET; Gets value from Value Block of MIFARE CLASSIC tag (only when Value Block)
▪ +; Increase value of Value Block of MIFARE CLASSIC tag (only when Value Block)
▪ -; Decrease value of Value Block of MIFARE CLASSIC tag (only when Value Block)
▪ WRITE2; Writes Write Data to 2 blocks which starts from EEPROM Block of Tag-It tag
▪ LOCK2; Locks 2 blocks which starts from EEPROM Block of Tag-It tag
▪ READ mode; Selects option to read ISO-15693 tag (Inform, Multiple, Single)
▪ Write or Lock mode; Selects option to write/lock ISO-15693 tag (AFI, DSFID, EEPROM)
Scanning a tag
1. Set tag Type (ISO-14443A, ISO-14443-B, ISO-15693, TagSys, All Type)
2. Place terminal’s antenna part near at tag.
3. Tap SCAN or AUTO
4. If read successfully, you can find scan data on the result window.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern