Security Alarms AR6000 Betriebsanweisung PDF herunterladen (Seite 42)

42 SPEKTRUM DX6 • AIRCRAFT PROGRAMMING GUIDE

TRAVEL ADJUSTMENT

The amount of servo travel is adjustable in each direction independently for each of the six channels.

The adjustment range is from 0% to 150%. Travel adjustment is factory set at 100% for all channels.

The travel adjustment value direction displayed on the screen coincides with the position of the stick or

switch (e.g., ﬂap switch, gear switch). This function is useful to adjust control surface travel without the

need for mechanical adjustment.



















�























ACCESSING THE TRAVEL ADJUSTMENT FUNCTION

1. Turn on the transmitter.

2. Press the SCROLL and INCREASE buttons simultaneously to enter the function mode.

3. Press the SCROLL button until “TRV ADJ.” appears on the screen.

4. Press the CHANNEL button until the desired channel appears on the screen.

5. Move the selected channel stick or switch in the direction that you want to adjust the travel. Press the

INCREASE or DECREASE button to achieve the desired travel. Move the stick in the opposite direction to

adjust the travel in the opposite direction.

6. The same may be done for all channels.

7. Press the SCROLL button to access the aileron- to-rudder mixing function.

8. To exit, press the SCROLL and INCREASE buttons simultaneously.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 95 96

Keine Kommentare

Security Alarms AR6000 Betriebsanweisung Seite 42