Security Alarms AR6000 Betriebsanweisung PDF herunterladen (Seite 82)

82 SPEKTRUM DX6 • HELICOPTER PROGRAMMING GUIDE

REVOLUTION MIXING

Revolution Mixing is only used with conventional (non-heading hold) gyros. The Revolution Mixing function

combines tail rotor input with the throttle/collective function to counteract the torque created by the engine.

When properly adjusted, the helicopter will climb and descend without a tendency to yaw in either direction.

Revolution mixing is for use with non-heading lock gyros only. Since the torque created by the main rotor blades

varies with different throttle/pitch settings, it is necessary for the tail rotor blades to change pitch in unison. The

“U” or up mixing adjusts the tail rotor compensation from the mid to high throttle stick setting. The “D” or down

mixing adjusts the tail rotor compensation from the mid to the low throttle stick setting.

REVOLUTION MIXING SET-UP PROCEDURE

1. Set up the helicopter so that it will maintain a stable hover with the tail rotor trim in the center position.

Next, bring the helicopter into a steady vertical climb. The body of the helicopter will move in the opposite

direction to the main rotor rotation. Increase the “U” or up mixing until the helicopter climbs without the

tendency to rotate.

2. At a safe altitude, reduce the throttle. The helicopter will descend, and the body will turn in the same

direction as the main rotor blades. Increase the “D” or down mixing until the helicopter descends without the

tendency to rotate.



















�























ACCESSING THE REVOLUTION MIXING FUNCTION

1. Turn on the transmitter.

2. Press the SCROLL and INCREASE buttons simultaneously to enter the Function mode.

3. Press the SCROLL button until “RVU” appears on the screen.

4. Press the CHANNEL button to select the up or down Mixing function.

5. Press the INCREASE or DECREASE button to adjust the mixing value of the applicable function. Press the

CHANNEL and INCREASE buttons simultaneously to reset the mixing value to 0%. To change the mixing

direction, press the CHANNEL and INCREASE buttons simultaneously again.

6. Press the SCROLL button to access the Programmable Mix A function.

7. To exit, press the SCROLL and INCREASE buttons simultaneously.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Security Alarms AR6000 Betriebsanweisung Seite 82

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Security Alarms AR6000