Security Alarms AR6000 Betriebsanweisung PDF herunterladen (Seite 79)

79SPEKTRUM DX6 • DX6 HELICOPTER PROGRAMMING GUIDE

ACCESSING THE PITCH CURVE FUNCTION

1. Turn on the transmitter.

2. Press the SCROLL and INCREASE buttons simultaneously to enter the Function mode.

3. Press the SCROLL button until “PLN” appears on the screen. The letter to the far right indicates the speciﬁc

pitch curve section that you are in (N, S or H). The letter in the center indicates the point that is selected.

4. Press the CHANNEL button to select the pitch point of the pitch curve you want to change.

5. Press the INCREASE or DECREASE button to change the value of the current reference point. The range of

each point is adjustable from 0–100% in 1% intervals.

6. To set the pitch curve for the stunt (ﬂight) mode, press the SCROLL button once to access PLS. Repeat Step

5 and Step 6 to adjust.

7. To set the pitch curve for the throttle hold mode, press the SCROLL button once to access PLH. Repeat

Step 5 and Step 6 to adjust.

8. Press the SCROLL button to access the throttle curve function.

Note: If throttle hold is not activated, the Throttle Curve function will be accessed.

9. To exit, press the

MODE and CHANNEL buttons simultaneously.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 95 96

Keine Kommentare

Security Alarms AR6000 Betriebsanweisung Seite 79