Security Alarms AR6000 Betriebsanweisung PDF herunterladen (Seite 68)

68 SPEKTRUM DX6 • HELICOPTER PROGRAMMING GUIDE

DUAL RATE SWITCH SELECTION

The dual rate switch position is selectable and the elevator and aileron dual rates can be combined on one

switch. This allows a single switch to be used when moving from high rates to low rates. Exponential Rate (EXP)

is also available for both aileron and elevator and works in conjunction with the dual rate function to provide

reduced sensitivity movements around neutral while allowing maximum servo travel. This reduces sensitivity in

the middle portion of the stick control and still allows full travel at the end of the stick control. Refer to page 74

for exponential rate adjustment.



























Note: For an easy method to add dual rate rudder see mixing page 87. Refer to page 74 for

exponential rate adjustment.

ACCESSING THE DUAL RATE SWITCH SELECTION FUNCTION

1. Press the SCROLL and INCREASE buttons simultaneously and hold.

2. Turn on the transmitter to enter the system mode.

3. Press the SCROLL button until “D/R SW” appears on the screen.

4. Press the INCREASE or DECREASE button until the desired switch position appears on the screen. (E.A, A.,

E. or CF)

5. Press the SCROLL button to access the Wing Type selection function.

6. To exit, press the

SCROLL and INCREASE buttons simultaneously.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 95 96

Keine Kommentare

Security Alarms AR6000 Betriebsanweisung Seite 68